SENSIT s.r.o.

Address: SENSIT s.r.o.
Skolni 2610
Roznov pod Radhostem
756 61
Czech Republic
Phone: +420 571 625 571 Connect: Website: View website Contact: Contact supplier

Temperature, Humidity, CO2, Atmospheric Pressure and VOC Sensors for Railway Vehicles

The company SENSIT s.r.o. has been in the Czech market since 1991. The company has been engaged in the development, production and supply of special temperature sensors, relative humidity sensors, CO2 sensors, atmospheric pressure sensors and VOC sensors for railway vehicles since 2004.

SENSIT s.r.o. also manufactures electronic and bimetal temperature switches and converters for railway vehicles.

Products for this segment must meet specific properties defined in the so-called railway standards: EN 50155, EN 61373, EN 50121-3-2, and EN 45545-2 or NFPA 130. These include; especially resistance to vibrations, electrical safety, meeting fire standards and electronic components that have to meet the conditions for electromagnetic compatibility (EMC). All these characteristics are taken into consideration during development – this is confirmed with a test report and a certificate issued by an independent accredited testing laboratory.

Standard products of the company SENSIT s.r.o. find their use in applications such as:

  • Measurements of temperature of axle bearings
  • Measurements of temperature of air for cooling of traction electric motors of shunting locomotives
  • Measurements of temperature of cooler, batteries or other components featuring flat surface
  • Secondary measurements of temperature of electrical resistors of electrodynamic brakes of electric and diesel-electric locomotives
  • Measurements of temperature, relative humidity, CO2, atmospheric pressure and VOC in passenger compartments of train sets and carriages, part of temperature control
  • Part of system of temperature, relative humidity, CO2, atmospheric pressure and VOC control in passenger compartments or temperature indication in machine compartment as part of a fire safety system
  • Measurements of temperature of outside air under the floors of railway vehicles
  • Temperature, relative humidity, CO2, atmospheric pressure and VOC sensors for general use, e.g., in air conditioning and temperature control systems
  • Measurement of temperature of Diesel oil – part of the system of measurement and indication of operating efficiency
  • Measurements of temperature on the surface of base boards of inverters and coolers of power components of electric locomotives
  • Indication of input and output temperature for control of hot-air heating units in passenger compartments
  • Measurements of water and sewage ducts of passenger carriages or ducts of cooling systems of Diesel engines in Diesel or Diesel-electric locomotives and train units
  • Temperatures sensor for control of heating of trolleybus trolleys
  • Measurements of temperature in motors, transmissions, machines and equipment featuring vibrations during operation
  • Sensor of temperature as part of a system for automatic heating of rail switches

At present, we can offer to our customers temperature sensors for railway vehicles, combined temperature and humidity sensors for Railway vehicles, combined temperature, humidity and CO2 sensors for Railway vehicles, combined temperature, humidity, atmospheric pressure and VOC sensors and combined temperature, humidity, CO2, atmospheric pressure and VOC sensors for railway vehicles, converters for railway vehicles and electronic and bimetal temperature switches for railway vehicles.

Temperature Sensors for Railway Vehicles

Temperature sensors made by SENSIT s.r.o. meet all railway standards of EN 50155, EN 61373, EN 50121-3-2 and EN 45545-2 or NFPA 130. The basic outputs of these sensors include:

  • Resistance (all types)
  • Digital – RS 485 (MODBUS), CAN protocol (CANopen)
  • Current – 4 to 20 mA
  • Voltage – 0 to 10 V

Combined Temperature and Humidity Sensors for Railway Vehicles

These combined sensors made by SENSIT s.r.o. meet all railway standards of EN 50155, EN 61373, EN 50121-3-2 and EN 45545-2 or NFPA 130. The basic outputs of these sensors include:

  • RS 485 (MODBUS RTU)
  • CAN / CANopen – CiA DS 301

Combined Temperature, Humidity and CO2 Sensors for Railway Vehicles

These combined sensors made by SENSIT s.r.o. meet all railway standards of EN 50155, EN 61373, EN 50121-3-2 and EN 45545-2 or NFPA 130. The basic outputs of these sensors include:

  • RS 485 (MODBUS RTU)
  • CAN / CANopen – CiA DS 301

Combined Temperature, Humidity, Atmospheric Pressure and VOC Sensors for Railway Vehicles

These combined sensors made by SENSIT s.r.o. meet all railway standards of EN 50155, EN 61373, EN 50121-3-2 and EN 45545-2 or NFPA 130. The basic outputs of these sensors include:

  • RS 485 (MODBUS RTU)
  • CAN / CANopen – CiA DS 301

Combined Temperature, Humidity, CO2, Atmospheric Pressure and VOC Sensors for Railway Vehicles

These combined sensors made by SENSIT s.r.o. meet all railway standards of EN 50155, EN 61373, EN 50121-3-2 and EN 45545-2 or NFPA 130. The basic outputs of these sensors include:

  • RS 485 (MODBUS RTU)
  • CAN / CANopen – CiA DS 301

CO2 Sensors

CO2 sensors made by SENSIT s.r.o. meet all railway standards of EN 50155, EN 61373, EN 50121-3-2 and EN 45545-2 or NFPA 130. The basic outputs of these sensors include:

  • 0 – 10 V
  • 4 – 20 mA
  • RS 485 (MODBUS RTU)
  • CAN / CANopen – CiA DS 301

Temperature Converters for Railway Vehicles

Temperature/current and temperature/voltage converters made by SENSIT s.r.o. meet all railway standards of EN 50155, EN 61373, EN 50121-3-2 and EN 45545-2.

We are able to offer the converters for mounting on a DIN rail or wall-mounted.
Standard outputs include:

  • 4 to 20 mA
  • 0 to 10 V

We are also preparing a version with an RS 485 output and CAN protocol.
Inputs include: Pt 100, Pt 1000, Ni 1000.

Electronic and Bimetal Temperature Switches for Railway Vehicles

Temperature switches made by SENSIT s.r.o. meet all railway standards of EN 50155, EN 61373, EN 50121-3-2 and EN 45545-2.

  • Input: Pt 100, Pt 1000, Ni 1000 or bimetal TMC – C1B
  • Output: 2 relays
  • Contact design: normally closed / snap action

The temperature switch operates in 5 different modes adjustable by users. We can offer you version of temperature switches by bimetal technology.

Customized Temperature Sensors

The company SENSIT s.r.o. has its own design and production centres. We are able to produce a customized temperature or other sensors directly for a given application on the basis of customer’s requirements. Samples are usually produced within 3 weeks from project assignment. When the final design of a sensor has been approved, we proceed it to serial production. Our supplied sensors include all protocols according to railway standards.

In addition, we offer cooperation in the area of development of electronics for railway vehicles. On customer’s requirement, we are able to design and produce a product directly for your application.

Read more

SENSIT s.r.o. News

SENSIT Sensors – Now Available in a White Box!

SENSIT Sensors – Now Available in a White Box!

SENSIT sensors are now available in a new white box, RAL 9003 white, helping the sensors blend in with their surroundings.

New Website for Railway Vehicle Sensors

New Website for Railway Vehicle Sensors

SENSIT has a new website for railway vehicle sensors, helping you select a measured quantity and find information quickly and easily.

Innovated KTSZ4H Temperature Switch Designed for Railway Vehicles

Innovated KTSZ4H Temperature Switch Designed for Railway Vehicles

Based on their customer's ever growing requests SENSIT would like to present to you their new KTSZ4H temperature switch for railway vehicles.

Interior Temperature Sensors for Railway Vehicles

Interior Temperature Sensors for Railway Vehicles

In response to increasing air quality requirements, SENSIT is introducding a new line of interior temperature sensors for railway vehicles.

Sensors, Switches and Converters for Railway Vehicles

Sensors, Switches and Converters for Railway Vehicles

SENSIT s.r.o. has been developing, producing & supplying special sensors, switches and converters for railway vehicles since 2004.

Czech Sensor Specialist Sensit at Hannover Messe 2019

Czech Sensor Specialist Sensit at Hannover Messe 2019

The Hannover Messe is one of the world's largest trade fairs. One of the companies exhibiting this year is temperature sensor expert Sensit.

SENSIT s.r.o. Presents Comprehensive Line of Interior Sensors for Railway Vehicles

SENSIT s.r.o. Presents Comprehensive Line of Interior Sensors for...

With growing requirements on quality of interior air in the area of home-building, this trend is shifting to the means of transport, as well. Therefore, railway...

NEW DESIGN of the Interior Temperature Sensor for Railway Vehicles

NEW DESIGN of the Interior Temperature Sensor for Railway Vehicle...

SENSIT s.r.o. would like to introduce to you the new modern design of an Interior Temperature Sensor for Railway Vehicles with a resistance, current and...

Combined Sensors for Effective Ventilation in Rail Vehicles

Combined Sensors for Effective Ventilation in Rail Vehicles

With the use of Combined temperature, relative humidity and CO2 sensors, SENSIT s.r.o. ensure effective ventilation in rail vehicles.

New KTSZ3H Temperature Switch from SENSIT s.r.o.

New KTSZ3H Temperature Switch from SENSIT s.r.o.

...including the fire protection standard EN 45545. We have supplemented the input signal of the temperature switch with the PT 100 input.

New Temperature Converters for Railway Vehicles

New Temperature Converters for Railway Vehicles

We are presenting new temperature converters – the KSTID and KSTUD converters designed to convert resistance signal to the unified signal of 4 to 20 mA...

SENSIT s.r.o. Images

SENSIT Portfolio Temperature Sensors Railway Vehicles

SENSIT's Portfolio of Temperature Sensors for Railway Vehicles

Special Temperature Sensors for Railway Vehicles

Temperature Sensors for Railway Vehicles

Converters for Railway Vehicles

Converters for Railway Vehicles

SENSIT KTSZ3H Temperature Switch

Temperature Switch for Railway Vehicles

Temperature sensors for Railway Vehicles

Temperature Sensors for Rail Vehicles from SENSIT s.r.o.

Combined Interior Sensors SENSIT s.r.o.

Combined Interior Sensors

Sensit KNS 520

KNS 520

Sensit KPTS 410

KPTS 410

Sensit KPTS 410A KPTS 410B

KPTS 410A and KPTS 410B

Sensit KTG 2

KTG 2

Sensit KTG 3

KTG 3

Sensit KTG 6E

KTG 6E

Sensit KTG 12

KTG 12

Sensit KTG 68B

KTG 68B

Sensit KTG 8

KTG 8

Sensit KTR 021A

KTR 021A

Sensit KTR 026D

KTR 026D

Sensit KTR 028A

KTR 028A

Sensit KTR 030A

KTR 030A

Sensit KTR 069R

KTR 069R

Sensit KTR 081

KTR 081

Sensit KTR 107

KTR 107

Sensit KTR 141E

KTR 141E

Sensit KTR 149

KTR 149

Sensit KTR 164

KTR 164

Sensit KTR 167R

KTR 167R

Sensit KTR XXX

KTR XXX

Sensit KTR 021

KTR 021

Sensit KTR 026Ha

KTR 026Ha

Sensit KTR 156

KTR 156

Sensit KTSZ3H

KTSZ3H

SENSIT s.r.o. Documents

SENSIT s.r.o. Social

Facebook

Contact SENSIT s.r.o.

Use the form opposite to get in touch with SENSIT s.r.o. directly to discuss any requirements you might have.






    We'd love to send you the latest news and information from the world of Railway-News. Please tick the box if you agree to receive them.

    For your peace of mind here is a link to our Privacy Policy.

    By submitting this form, you consent to allow Railway-News to store and process this information.

    Subscribe
    Follow Railway-News on LinkedIn
    Follow Railway-News on Twitter