Why Use 3M™ Scotchgard™ Multi-Layer Protective Film 1004?
When glass barriers become the palette for graffiti it loses it purpose. By applying 3M™ Scotchgard Multi-Layer film you have the ability to keep your assests clean and neat. 3M Scotchgard™ Multi-layer Protective Film is an optically transparent, pressure-sensitive polyester film tapes designed to protect surfaces from intentional and unintentional damage caused by scratching, etching, abrasion and graffiti.
One installation of 3M™ Scotchgard™ Multi-Layer Protective Film will protect the glass and metal surfaces of your faciltiy from graffiti, scratches and other forms of vandalism, allowing you to peel away four graffiti defacements in seconds so you can:
Buildings are not exempt from graffiti by acid etching and tagging. Elevators, escalators and bathroom mirrors have all become prime targets for vandalism. This type of graffiti significantly impacts your building aesthetics could translate to decreased reputation. There is a potential for decreased property value if not removed.
Removable surface protective film is the most cost-effective. The film protects damage from graffiti and/or shields a vulnerable area from damage before it happens. The film is easily removed and replaced should the surface be vandalized.
Installing surface protective film tackles vandalism while achieving considerable cost and time savings compared to replacement.
Public bathrooms are used by thousands of individuals a day. With so much use, many surface areas inside a public bathroom are highly likely to be vandalized. The maintenance for repair and replaced add up to a lot of money and time that can be detrimental to your bottom line as well as its image too.
“One installation of 3M™ Scotchgard™ Multi-Layer Protective Film allows you to protect a surface from graffiti, scratches and other forms of vandalism by allowing you to peel away four graffiti defacements in seconds.”
For best results, the surface must be clean and free of dirt, debris and oils and should be applied when the surface temperature exceeds 50°F (10°C).
Use of an application solution and Heavy Duty Squeegee is suggested for easy positioning and squeegee application.
Removal of film layers immediately after wet application is not recommended. Use of film removal tool is recommended for easy peel-back of the target layer.
For detailed Application Instructions and Tips, see 3M Technical Bulletin (70–0709–5334–7).
Use the form opposite to get in touch with INPS Group directly to discuss any requirements you might have.