Rail News

Tracksure: Newly-Launched Sensor System Could Turn Every Locomotive into a Track Monitor

RAILWAY experts at the University of Huddersfield Institute of Railway Research (IRR) are working with engineering giant Siemens to develop an inexpensive and easily-fitted sensor that could turn virtually every rail vehicle into a track monitor, detecting and transmitting vital information about the condition of rails and rail bed throughout the network.

The easily-fitted device will detect and transmit vital information about the condition of rails and rail beds

Tracksure
Dr Adam Bevan of IRR © University of Huddersfield
The result would not only be improvements in safety and reliability, but also major efficiency gains and cost savings for network operators, plus improved ride quality for passengers.

The track monitoring system, named Tracksure, has been developed by Siemens in collaboration with the Institute of Railway Research, as part of the Remote Condition Monitoring Competition supported by the Rail Safety and Standards Board (RSSB) and Network Rail.

Tracksure

Every train in the UK – and a huge proportion overseas – is fitted with a GSM-R cab radio system. Siemens itself produces one of the most widely-used devices.  It is now possible to retrofit an inexpensive Tracksure sensor card to the Siemens cab radios and by picking up vibrations they transmit information – received by a control centre – that can detect under-track voids.

Related Posts:  Mitsui Rail Capital Europe Orders Siemens Vectron Locomotives

These voids are gaps that have developed between sleepers and ballast.  In serious cases, they can lead to an increased risk of rail breaks, along with poor vehicle ride performance. Tracksure would therefore provide early warning of problems – especially at switches and crossings and at the transition to other high value assets such as bridges.

The system has now been described at the recent Railway Condition Monitoring conference in Birmingham organised by the Institution of Engineering and Technology (IET).  The project was outlined to delegates in a paper drafted and presented by Dr Farouk Balouchi and Dr Adam Bevan of the University of Huddersfield’s IRR, plus Roy Formston of Siemens UK.

Related Posts:  Siemens and Wi-Tronix Launch Predictive Maintenance Partnership

The IRR’s role in the project was to develop an all-new algorithm that could be programmed into the Tracksure sensors, so that they detect under-track voids.

Dr Balouchi said:

“It was very challenging. “Initially we used simulation to identify what type of sensors and what accuracy and sensitivity would be needed for the Tracksure prototype.  This led on to us developing a highly efficient algorithm which can process large quantities of acceleration data in a short space of time to detect the location and severity of potential track voids.”

The IET conference delegates heard how:

“Tracksure allows the network operator to make significant reductions in maintenance and delay costs, line closures, journey re-planning and speed restrictions, by having a reliable monitoring system that is non-intrusive yet gives analysis for the entire rail network, improving train safety, network reliability and passenger comfort.”

At the conference, Roy Formston of Siemens UK also detailed how techniques such as machine learning, additional functionality could be included to improve the detection accuracy by making use of multiple train runs over the same section of track.

Related Posts:  Siemens Multisystem Vectron Locomotive Certified for the Netherlands

Now that the practicality of on-board sensors has been demonstrated, the IRR is to collaborate further with Siemens in developing a concept that has the potential to provide levels of “big data” that could provide a huge boost to rail safety and cost-efficiency.

Dr Bevan added:

“Through this further work we are investigating additional functionalities of the system, whereby we can detect other anomalies from the track and the vehicle.”

For example, in addition to detecting voids, sensors could give early warning of problems such as corrugation of the track or wheel flats – distortions in wheel shape caused by factors such as the lack of adhesion.  Actual vehicle suspension faults could also be picked up by sensors.

Article © University of Huddersfield

News categories

14 Nov 2017
Caltrans Announces $371 Million Multi-State Contra ...
11 Oct 2017
Siemens and Wi-Tronix Launch Predictive Maintenanc ...
05 Oct 2017
Siemens Multisystem Vectron Locomotive Certified f ...
27 Sep 2017
Siemens and Alstom Join Forces to Create New ̵ ...
20 Sep 2017
Siemens Signs Bangkok Blue Line Extension Contract ...
18 Sep 2017
Mitsui Rail Capital Europe Orders Siemens Vectron ...
29 Aug 2017
Amtrak Rolls Out New Locomotives for Illinois and ...
09 Aug 2017
Siemens to Deliver 57 Mireo Trainsets for Rhine-Ne ...
Subscribe to Railway-News
Get the latest contract alerts and Railway News emailed directly to your inbox.

We respect your privacy and take protecting it seriously.