WB-MC

Witt Solutions GmbH

Back
WB-MC
Contact: Contact supplier View: View supplier Download: Download

Witt Solutions GmbH

WB-MC – Communicative Networking of WB Components for Railways

The WB component “WB-MC” enables communicative networking with remote components among themselves. It also supports the exchange of information with third-party systems via standard protocols.

There are two typical areas of application:

  • Communicative connection of a WITT Bridge measurement extension to a higher-level SCADA system.
  • Connection of different WB components to monitor the cable infrastructure. Optionally, a WB-HS can monitor and configure everything centrally.

The WB-MC component is connected to the WB backplane bus with third WB components. The WB component “translates” information from the WB components connected to the backplane bus and the external protocol.

Depending on the protocol used and the WB components, a wide variety of quantities and information can be transmitted:

  • Operational status
  • Control Commands
  • ACTUAL readings
  • Target values
  • Event-based transmission
  • No “real-time” transmissions

Download the full PDF here.

www.witt-solutions.de

We offer customized measurement, monitoring and test technology for DC applications of railway infrastructure, which really fit your needs.

All of our Professional Power monitoring products (PPM) are based on decades of experience and are complemented by new, modern intelligent 4.0 technologies. We manufacture in our own factory in Germany. It goes without saying, that all of products in the field of personal, building and railway infrastructure protection meet the requirements of DIN EN 50122, 50123 50124, 50526 and the high standards of the German Federal Railway Authority.

Other Witt Solutions GmbH Documents

Latest Witt Solutions GmbH News

WB-MC: Communicative Networking of WB Components

WB-MC: Communicative Networking of WB Components

The WB component "WB-MC" from Witt Solutions GmbH enables communicative networking with remote components among themselves.

WITT EscS P 1000 – Testing of VLD Switching Behaviour

WITT EscS P 1000 – Testing of VLD Switching Behaviour

The WITT EscS P 1000 test device is used for testing the switching behaviour of voltage limiting devices (VLDs).

Real-Time Cable Monitoring with the WITT CM 7

Real-Time Cable Monitoring with the WITT CM 7

The WITT CM 7 detects damage to return cables, offering protection against theft and detection of manipulations.

Autonomous Monitoring of Points with the WB-PM Unit

Autonomous Monitoring of Points with the WB-PM Unit

The WB-PM is used for the systematic determination of physical and electrical variables for assessing the system status of an electrically driven switch.

WITT EscS 7: Railway Voltage Limiting Device with Approval of the EBA

WITT EscS 7: Railway Voltage Limiting Device with Approval of the...

The WITT EscS 7 is an auto-resetting earth short-circuiting device that accords to EN regulations for the protection of public and infrastructure.

Contact Witt Solutions GmbH

Use the form opposite to get in touch with Witt Solutions GmbH directly to discuss any requirements you might have.









    We'd love to send you the latest news and information from the world of Railway-News. Please tick the box if you agree to receive them.

    For your peace of mind here is a link to our Privacy Policy.

    By submitting this form, you consent to allow Railway-News to store and process this information.

    Subscribe
    Follow Railway-News on LinkedIn
    Follow Railway-News on Twitter