Axiom Rail is a designer and supplier of innovative rail freight bogie and suspension systems, approved for use in the UK, Central Europe and the Nordic countries.
Axiom Rail also offers a comprehensive spares support network and bogie overhaul facility in both the UK and the Czech Republic to provide an unparalleled service for the after sales support of its vast OEM product range.
The AMIII Broad Gauge bogie was designed to meet the demands of 25 tonne axle load requirements in Finland.
The design creates a low profile axle motion bogie with some features that have been uniquely developed for operations in cold climates.
The design allows for passive steering of the wheelsets so that they are able to take up a radial alignment when the bogie travels through track curves. Rubber elements incorporated into the suspension arrangement permit the wheelsets to move in a controlled manner relative to the bogie frame whilst maintaining dynamic stability.
The bogie features a two-stage friction damped suspension system, vertical suspension is provided by helical steel coil springs, whilst lateral movements use a “swing link principle”.
The suspension movements are damped in both the vertical and lateral directions by a double chevron wedge system.
Wabtec applies a powerful combination of engineering knowledge, data engineering, and data science tailored to each client’s needs.
Wabtec are providing a bespoke Remote Monitoring solution for the MK3 HST Trailer Car and Class 43 Power Car sub-systems.
Eversholt awarded Wabtec Rail a long-term contract worth $140m to overhaul all bogies for Eversholt fleets, including the Mark 4 bogies.
Wabtec UK has developed a system that automates the railway asset management and allows seamless integration with their RCM solutions.
Wabtec UK have had a Full-Service Maintenance Contract since 2013 for legacy HVAC systems on a UK fleet of 30x 9 car Intercity Trains.
The M Module project directly connects to maintenance ports on equipment and communicating data wirelessly.
In 2017, Wabtec Rail secured a contract with TFL for the overhaul of 48 Bombardier-built CR4000 power bogies.
The LT118 Traction Motor is one of Brush’s well-known products, having first been manufactured in the 1970s.
Wabtec UK has a wealth of experience overhauling a broad portfolio of rolling stock power and trailer bogies.
The TF25sa is a hydraulically damped single axle suspension for axle loads up to 25 tonnes and can operate at a maximum speed of 160km/h.
The Wabtec Axiom Rail TF25 family of bogies are innovative low noise bogies and can operate at a maximum speed of 120km/h.
Use the form opposite to get in touch with Wabtec UK directly to discuss any requirements you might have.