Mosdorfer Rail Ltd
Mosdorfer Railway Catenary Systems
Solutions for Railway Catenary Systems
Cantilever with Forged Aluminium Fittings
L.-No. – Type – Tube diameter (Top/Slanting/Bottom) (mm) – Size (mm)
- 000 701 286-00000 – Push-off – 55 / 70 / 55 – 3450
- 000 701 286-00001 – Pull-in – 55 / 70 / 55 – 3450
- 000 701 264-00000 – Out-of-running – 55 / 70 / 55 – 3450
Remark: Reinforcements available on request. Many more cantilever assembly sets available. Please contact Mosdorfer for your requirements or projects.
Application:
- High speed lines
- 15/25 kV AC, 3 kV DC
- Contact wire: AC/BC 80/150
- Messenger wire: up to 150 mm2
Advantages:
- Designed for demands of High Speed Lines.
- Forged fittings with higher strength and working loads.
- Improved corrosion resistance.
- Longer life cycle.
- Intelligent fitting design allows many different cantilever geometries.
- Ideal for maintenance and new railway line projects.
Cantilever with Cast Aluminium Fittings
L.-No. – Type – Tube diameter (Top/Slanting/Bottom) (mm) – Remarks
- 234 000 001 – High Speed lines, pull-in – 55 / 70 / 55 / 42 – Including steady arm
- 234 000 006 – Conventional lines, pull-in – 55 / 70 / 55 – Including steady arm
- 234 000 010 – Conventional lines, pull-in – 55 / 70 / 42 – Including steady arm
- 234 000 011 – Conventional lines – 55 / 55 / 42 / – For overlaps, without steady arm
- 234 000 012 – Conventional lines, pull-in – 55 / 55 / 42 / 42 – Including steady arm
- 234 000 013 – Conventional lines, push-off – 55 / 55 / 42 – Including steady arm
- 234 000 014 – Conventional lines, pull-in – 55 / 55 / 42 – Including steady arm
- 234 000 015 – Conventional lines, push-off – 55 / 70 / 55 / 42 – Double reinforcement, curved steady arm
- 234 000 017 – Out-of-Running – 55 / 70 / 55 / 42 – Double reinforcement, without steady arm
Remark: Many more cantilever assembly sets available. Please contact Mosdorfer for your requirements or projects
Application:
- Standard main lines
- 15/25 kV AC, 3 kV DC
- Contact wire: AC/BC 80/150
- Messenger wire: up to 150 mm2
Advantages:
- Cast fittings for all railway applications.
- Costs efficient.
- Many different assembly variants possible.
- Intelligent fitting design allows many different cantilever geometries.
- Ideal for maintenance and new railway line projects
Forged Cantilever Components
Eye Clamp
L.-No. – Pipe diameter D (mm) Height A (mm) – Max. Service Load F (kN) Bolt (mm) – Tightening Torque (Nm) – Weight (kg)
- 000 701 290 00000 – 70 – 92,1 – 10,7 – M12 – 35 – 1,038
- 000 701 290 00001 – 55 – 81,5 – 10,7 – M12 – 35 – 0,995
Material:
- Forged double tube holder (EN AW- 6082 T6)
- U-bolt: M12 (Stainless steel A2-70)
- Nuts: M12 INOX UNI 5588 (Stainless steel A2-70)
- Washers: Washer 12×24 ISO 7089 (A2-70)
- Spring washer: M12 UNI 1751 (A2-70)
