Our natural hazard detection system warns railways in near-real-time of landslides or rockfalls along their rail routes. This supports operators to take action where a rockfall or landslip has been detected to:
Our landslide and rockfall detection works by monitoring vibrations along entire railway routes to listen for characteristic vibrations caused by falling rocks or moving earth. It uses an optical fibre running alongside the track to detect vibrations providing protection along the entire fibre route.
Identify:
Real-time detection of landslides or rockfalls
Alert:
Receive notification and precise location
Act:
Appropriate response initiated
Alternative landslide and rockfall detection solutions often rely on many discrete point sensors that sense only very local disturbances and require power and communications at every location, a significant challenge in remote areas. Traditional cable and wire systems are prone to failure and require manual reset by people on site. Due to the installation and operation challenges, difficult choices must often be made on which areas of track to protect with these techniques.
Sensonic provides an improved modern alternative. We use fiber optic cable to provide continuous landslide and rockfall protection for long lengths of track. The system resolves the location of landslide and rockfall detections quickly and accurately allowing action to be taken and accidents prevented.
Use the form opposite to get in touch with Sensonic directly to discuss any requirements you might have.