Yumain
Automatic Pantographs
Detection and Fault Analysis
Detect, analyse to prevent and act!
Automated real-time analysis allows the prevention of catenary tearing incidents, together with the predictive maintenance of pantographs.
Operating principle: (Train speeds can reach up to 160 km/h.)
- Automatic detection and identification of the train as soon as it passes under the sensor.
- Detection and Analysis of Pantograph’ integrity: Presence of horns, friction strips: chips, cracks and furrows, homogeneity and thickness of the carbon strip as well as pantograph’s misalignment.
- As soon as a defect is detected, an alarm is generated and directly sent via a 4G communication, or any other low cost communication media.
- Location and counting of the pantographs (folded or unfolded) is an option.
Intelligent device: Processing, analysis and alert sending in real time.
Plug and play: Simple installation and commissioning. Alert sent only when defects are seen.
Optimized and controlled maintenance costs: Very attractive sensor prices allowing the multiplication of control points on the rail network.
Connected alarm system: Alert sent via 4G communication. Device adaptable to the tramway market.
>> Read the full document
Find out more at www.yumain.fr.
